Difference between revisions of "Fish Protection System (induced drift application)"

From FIThydrowiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[file:icon_downstream.png|right|150px|link=[[Downstream fish migration]]]]
 
 
{{Note|This technology has been enhanced in the FIThydro project! See [[Innovative technologies from FIThydro]] for a complete list.|reminder}}
 
{{Note|This technology has been enhanced in the FIThydro project! See [[Innovative technologies from FIThydro]] for a complete list.|reminder}}
'''Note: This article will be finished with the submission of deliverable 3.3 and 3.4 in October, 2020'''
 
  
 
=Quick summary=
 
=Quick summary=

Latest revision as of 14:43, 9 October 2020

This technology has been enhanced in the FIThydro project! See Innovative technologies from FIThydro for a complete list.

Quick summary

Figure 1: Schematic sketch of fish passage through a vertical axis Kaplan turbine without (left) and with (right) IDA device.
Figure 2: IDA pilot at the 35 kW Kaplan turbine intake at the TUM Lab with the two ring-shaped copper electrodes
Figure 3: Comparison of observed damage rates for fish passage without (blue) and with IDA pilot device (red) for varying fish lengths (total length TL) in the 35 kW pilot.

Date: 2020

Developed by: TU Munich, Chair of Hydraulic and Water Resources Engineering, Franz Geiger

Type: Device

Introduction

The IDA technology provides an alternative approach to improve fish downstream passage at HPPs. Fish damage rates during turbine passage are reduced by specific fish behavior manipulation prior and during passage using electric fields. The technique works without screening or bypass systems, no specific water losses occur or maintenance measures are required. Constructional efforts are very limited and therefore the IDA technology is well suited for retrofitting at existing HPPs.

Application

The exposure probabilities and intensities of blade strike and shear stresses to fish significantly depend on the actual location where fish enter and pass through the turbine. The technical implementation of the IDA device can be based generally on various behavioral stimuli like light, ultra-sound or electrical fields. Electrical fields are especially favorable due to the fish’s reaction on such. For low field strength, electric fields show repulsive effects on fish. For higher field strength, fish show automatic movement towards the anode (electro-taxis). Moreover, an electrically induced narcosis can occur and persist for a few seconds to a few minutes after field exposure (also called electro-narcosis) depending on the field strength and the exposure time.

For the simplest implementation, the IDA technology builds up a continuous electrical field and guides the fish to the anode, an entry point in the vicinity of the hub, where survival rates are high (see figure 1). Additionally, forcing fish prior to turbine passage into random orientation, e.g. by narcosis, can significantly further support survival of fish during turbine passage. During the FIThydro project a first pilot of the IDA has been tested at a small 35 kW Kaplan turbine in the TUM Lab in Obernach, Bavaria (see figure 2).

First results for the pilot operating in full load are presented in figure 3, showing a reduction of damage rates by about 55 %. The difference with and without IDA device is statistically relevant (Fisher´s exact test, p < 0.01).

Relevant mitigation measures and test cases

Relevant measures
Fish-friendly turbines
Relevant test cases Applied in test case?
Altheim test case -
Altusried test case -
Anundsjö test case -
Bannwil test case -
Bragado test case -
Gotein test case -
Guma and Vadocondes test cases -
Günz test case -
Ham test case -
Las Rives test case -
Schiffmühle test case -
Trois Villes test case -

Other information

TUM holds an EU patent for the IDA (EP3029203).

Relevant literature

FIThydro deliverable D3.4 available at https://www.fithydro.eu/deliverables-tech/