Difference between revisions of "Fish refuge under hydropeaking conditions"

From FIThydrowiki
Jump to navigation Jump to search
m (Text replacement - "category:Measures" to "category:Solutions")
 
(41 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[file:icon_habitat.png|right|150px|link=[[Habitat]]]]
 
[[file:icon_habitat.png|right|150px|link=[[Habitat]]]]
 
{{Note|This technology has been developed in the FIThydro project! See [[Innovative technologies from FIThydro]] for a complete list.|reminder}}
 
{{Note|This technology has been developed in the FIThydro project! See [[Innovative technologies from FIThydro]] for a complete list.|reminder}}
 +
 +
[[file:fish_refuge_lateral_deflectors.png|thumb|250px|Figure 1: Lateral deflector tested at the indoor flume.]]
 +
[[file:fish_refuge_overhead_cover.png|thumb|250px|Figure 2: Overhead cover tested in the indoor flume.]]
 +
[[file:fish_refuge_flume_config.png|thumb|250px|Figure 3: Flume configuration for each trial and details of the tested flow-refuges. A: i) parallel upstream deflectors and ii) alternate downstream deflectors; B: one-sided deflectors; C: Overhead cover (L-structures),. DL, IL and UL: downstream, inside and upstream  overhead cover refuge areas respectively. All dimensions are in meters (m) except for E.]]
 +
[[file:fish_refuge_circular_flow_chart.png|thumb|250px|Figure 4: Circular flow chart displaying a potential sequence of steps to study the impacts of hydropeaking in flume conditions and to propose mitigation measures accordingly. Adapted from Costa et al. (2019).]]
 +
  
 
=Introduction=
 
=Introduction=
The solution consists of fish flow-refuges to be deployed in rivers affected by hydropeaking. The design of this solution was based on the analysis of fish responses (blood physiology and movement behaviour) in relation to changing flow events that mimicked hydropeaking conditions in rivers. Diverse flow-events changing in frequency, magnitude, duration and rate of change and flow-refuges were tested. Fish responses were quantified to effectively measure the utility of the structures as flow-refuges for fish. The mitigation measures here presented are lateral refuges, specifically lateral deflectors and overhead structures (Figure 1), which exhibited the highest use rates. The material, dimensions, number and position in the flume (Figure 2) were selected according to 1) material resistance and ability to mimic natural refuges, 2) species-specific traits, and 3) previous research conducted for other fish species.  
+
The solution consists of fish flow-refuges to be deployed in rivers affected by hydropeaking. The design of this solution was based on the analysis of fish responses (blood physiology and movement behaviour) in relation to changing flow events that mimicked hydropeaking conditions in rivers. Diverse flow-events changing in frequency, magnitude, duration and rate of change and flow-refuges were tested. Fish responses were quantified to effectively measure the utility of the structures as flow-refuges for fish. The mitigation measures here presented are lateral refuges, specifically lateral deflectors and overhead structures (Figure 1 and 2), which exhibited the highest use rates. The material, dimensions, number and position in the flume (Figure 3) were selected according to 1) material resistance and ability to mimic natural refuges, 2) species-specific traits, and 3) previous research conducted for other fish species.  
 
=[[Methods, tools, and devices]]=
 
=[[Methods, tools, and devices]]=
  
 
==During planning==
 
==During planning==
To design flow-refuges for fish as mitigation measures to hydropeaking, it is necessary to understand the effects of rapid flow fluctuations on fish and which variations in flow are causing those effects. A promising approach is to simulate the flow events occurring in hydropeaking rivers in artificial flumes. To examine the potential effects of hydropeaking and to propose flow-refuges as mitigation solutions, a series of steps that incorporate multiple disciplines (Figure 3) should be adopted. These steps are complementary and not mutually exclusive; for example, the selection of the target species dictates the selection of the flow-event and type of flow-refuge (Figure 3).  
+
To design flow-refuges for fish as mitigation measures to hydropeaking, it is necessary to understand the effects of rapid flow fluctuations on fish and which variations in flow are causing those effects. A promising approach is to simulate the flow events occurring in hydropeaking rivers in artificial flumes. To examine the potential effects of hydropeaking and to propose flow-refuges as mitigation solutions, a series of steps that incorporate multiple disciplines (Figure 4) should be adopted. These steps are complementary and not mutually exclusive; for example, the selection of the target species dictates the selection of the flow-event and type of flow-refuge (Figure 4).  
  
 
First, it is necessary to identify the flow changes (flow rate, duration, frequency, rate of change and timing) that occur in rivers affected by hydropeaking and adapt it to flume conditions. The peak discharges, frequency and ramping rates to be tested can be adapted during the experiments according to the findings of each trial.  
 
First, it is necessary to identify the flow changes (flow rate, duration, frequency, rate of change and timing) that occur in rivers affected by hydropeaking and adapt it to flume conditions. The peak discharges, frequency and ramping rates to be tested can be adapted during the experiments according to the findings of each trial.  
Line 13: Line 19:
 
The design of potential low-refuges has also to consider the characteristics of the flume. It is preferable that the flume has a bottom adequate to attach structures of different shapes, sizes and material. For the design of the presented flow-refuges the trials were conducted at an indoor flume (8.00 m x 0.70 m x 0.80 m), constructed on a steel frame with glass panels on both sides, with a usable area for fish that was limited by two perforated metal panels creating a 6.5 m long-reach. The lateral deflectors consisted of vertical PVC flashboards (0.30 m x 0.76 m x 0.015 m) attached to the flume bottom to mimic lateral refuges in a river channel (Figure 1). The reasoning to select lateral structures was: (i) their broad use in river restoration actions (Pretty et al., 2003), (ii) velocity preferences of the target species (Ferreira et al., 2007; Oliveira et al., 2002); (iii) velocity refuges proposed for other species (Ribi et al., 2014), (iv) habitat modelling studies based on suitability curves (Almeida et al., 2017), and in (v) studies aiming at designing effective fishways for Iberian cyprinids (Branco et al., 2013).  
 
The design of potential low-refuges has also to consider the characteristics of the flume. It is preferable that the flume has a bottom adequate to attach structures of different shapes, sizes and material. For the design of the presented flow-refuges the trials were conducted at an indoor flume (8.00 m x 0.70 m x 0.80 m), constructed on a steel frame with glass panels on both sides, with a usable area for fish that was limited by two perforated metal panels creating a 6.5 m long-reach. The lateral deflectors consisted of vertical PVC flashboards (0.30 m x 0.76 m x 0.015 m) attached to the flume bottom to mimic lateral refuges in a river channel (Figure 1). The reasoning to select lateral structures was: (i) their broad use in river restoration actions (Pretty et al., 2003), (ii) velocity preferences of the target species (Ferreira et al., 2007; Oliveira et al., 2002); (iii) velocity refuges proposed for other species (Ribi et al., 2014), (iv) habitat modelling studies based on suitability curves (Almeida et al., 2017), and in (v) studies aiming at designing effective fishways for Iberian cyprinids (Branco et al., 2013).  
  
For the overhead cover, the structure was constructed in maritime plywood and was conceptualised based on bank hides that were designed for habitat improvement for trout, termed as LUNKERS (Little Underwater Neighbourhood Keepers Encompassing Rheotactic Salmonids) (IDNR, 2018). This structure (0.60 m x 0.08 m x 0.24 m) was installed in the right wall of the flume (Figure 1 and Figure 2).
+
For the overhead cover, the structure was constructed in maritime plywood and was conceptualised based on bank hides that were designed for habitat improvement for trout, termed as LUNKERS (Little Underwater Neighbourhood Keepers Encompassing Rheotactic Salmonids) (IDNR, 2018). This structure (0.60 m x 0.08 m x 0.24 m) was installed in the right wall of the flume (Figure 2 and Figure 3).
  
 
The target fish species should be representative of the habitat where the flow-refuge will be deployed, or share the same habitat guilds. To measure the effectiveness of flow-refuges as solutions to mitigate hydropeaking based on fish responses, different organism-level responses should be selected (e.g., metabolic changes and whole-animal performance metrics likely to be associated with rapid flow fluctuations). Glucose and lactate could be adequate because they generally increase after endocrine processes directly associated with primary responses to stress (Pankhurst, 2011). Glucose generally increases after the cortisol response through the cortisol-mediated gluconeogenesis (Pankhurst, 2011); thus, there is a time latency between cortisol and the glucose response, and it has been broadly used in flow variability studies with reported increments comparatively to pre-stress levels (Arnekleiv et al., 2004; Krimmer et al., 2011). Lactate is a metabolite of muscle activity and is expected to increase during continued swimming effort (Kieffer, 2000), ultimately resulting in exhaustion (Wendelaar Bonga, 1997). The validity of a fish response will only be significant if compared with a base-flow or control condition.
 
The target fish species should be representative of the habitat where the flow-refuge will be deployed, or share the same habitat guilds. To measure the effectiveness of flow-refuges as solutions to mitigate hydropeaking based on fish responses, different organism-level responses should be selected (e.g., metabolic changes and whole-animal performance metrics likely to be associated with rapid flow fluctuations). Glucose and lactate could be adequate because they generally increase after endocrine processes directly associated with primary responses to stress (Pankhurst, 2011). Glucose generally increases after the cortisol response through the cortisol-mediated gluconeogenesis (Pankhurst, 2011); thus, there is a time latency between cortisol and the glucose response, and it has been broadly used in flow variability studies with reported increments comparatively to pre-stress levels (Arnekleiv et al., 2004; Krimmer et al., 2011). Lactate is a metabolite of muscle activity and is expected to increase during continued swimming effort (Kieffer, 2000), ultimately resulting in exhaustion (Wendelaar Bonga, 1997). The validity of a fish response will only be significant if compared with a base-flow or control condition.
Line 23: Line 29:
 
The flow-refuges should assure low-velocity regions during up-ramping and connectivity with the main channel during the down-ramping stage. To guarantee these conditions it is necessary to consider specific design criteria (e.g. size and position) (Table 1) according to the existing hydraulic conditions in the river.
 
The flow-refuges should assure low-velocity regions during up-ramping and connectivity with the main channel during the down-ramping stage. To guarantee these conditions it is necessary to consider specific design criteria (e.g. size and position) (Table 1) according to the existing hydraulic conditions in the river.
  
{| class="wikitable"  
+
''Table 1 Design criteria for the deployment of flow-refuges in streams affected by hydropeaking.''
|- style="font-weight:bold; background-color:#c0c0c0;"
+
{| class="wikitable" style="vertical-align:middle;"
 +
|- style="font-weight:bold; text-align:center; background-color:#C0C0C0;"
 
! Type of  refuge
 
! Type of  refuge
 
! Design criteria
 
! Design criteria
Line 30: Line 37:
 
! Reference
 
! Reference
 
|-
 
|-
| rowspan="4" | Lateral refuges
+
| rowspan="2" style="text-align:center; width:100px" | Lateral refuges
| rowspan="3" | Length, angle
+
|style="text-align:center;"| Length, angle
| Opening angle
+
|style="width:200px"|Opening angle:<br />-Same order of magnitude as the fish body length to favor group behavior, guide flow, prevent clogging and create or maintain the flow dynamics of the pool-riffle (sediment deposition-transport) systems while avoiding bank erosion.<br />-Excessively wide angles, in relation to the river bank, are discouraged
| rowspan="3" | Santos et al., 2014; <br />Ribi et al., 2014; <br />Carré et  al., 2007; <br />Pagliara et al., 2015
+
|style="width:150px" |Santos et al., 2014; <br />Ribi et al., 2014; <br />Carré et  al., 2007; <br />Pagliara et al., 2015
 
|-
 
|-
| - Same order of magnitude as the fish body length to favor group behavior, guide the flow, prevent clogging and create or maintain the flow dynamics of the pool-riffle (sediment deposition-transport)  systems while avoiding bank erosion.
+
| style="text-align:center;width:100px"|Water level
|-
+
| The downstream area of the deflectors (refuge area) should avoid potential stranding zones, or assure a minimum water depth <br />of 0.5 m, especially during down-ramping.
| - Excessive wide angles, in relation to the river bank, are discouraged.
 
|-
 
|style="width: 10%" |Water level
 
| The downstream area of the deflectors (refuge area) should avoid potential stranding zones, or assure a minimum water depth of 0.5 m, especially during down-ramping.
 
 
| Almeida et al., 2017; <br />Ribi et al., 2014
 
| Almeida et al., 2017; <br />Ribi et al., 2014
 
|-
 
|-
| rowspan="2"; style="width: 10%" | L-structures
+
| rowspan="2" style="text-align:center;" | L-structures
|Water level
+
|style="text-align:center;"| Water level
|Guarantee that these structures are permanently submerged to assure effective use and durability.
+
| Guarantee that these structures are permanently submerged to assure effective use and durability.
|USDA, 2007
+
| USDA, 2007
 
|-
 
|-
| Overhead cover
+
|style="text-align:center;"| Overhead cover
| Consider season and ontogeny: L. bocagei seeks out covered areas more in autumn in comparison to the warmest spring and summer seasons, whereas microhabitat use depends on size class.
+
| Consider season and ontogeny: L. bocagei seeks out covered areas more in autumn in comparison to the warmest spring and <br />summer seasons, whereas microhabitat use depends on size class.
 
| Boavida et al., 2015; <br />Santos et al., 2017
 
| Boavida et al., 2015; <br />Santos et al., 2017
 
|}
 
|}
 
 
These design criteria can be generalised to streams affected by hydropeaking as long as they are adapted to the ecological requirements of the fish community and the hydraulic conditions of the affected stream.
 
These design criteria can be generalised to streams affected by hydropeaking as long as they are adapted to the ecological requirements of the fish community and the hydraulic conditions of the affected stream.
  
=During operation==
+
==During operation==
 
Not applicable
 
Not applicable
  
Line 89: Line 91:
  
  
[[category:Habitat measures]][[category:Measures]] [[Category:developed in FIThydro]]
+
[[category:Habitat measures]][[category:Solutions]] [[Category:developed in FIThydro]]

Latest revision as of 10:03, 26 October 2020

Icon habitat.png
This technology has been developed in the FIThydro project! See Innovative technologies from FIThydro for a complete list.
Figure 1: Lateral deflector tested at the indoor flume.
Figure 2: Overhead cover tested in the indoor flume.
Figure 3: Flume configuration for each trial and details of the tested flow-refuges. A: i) parallel upstream deflectors and ii) alternate downstream deflectors; B: one-sided deflectors; C: Overhead cover (L-structures),. DL, IL and UL: downstream, inside and upstream overhead cover refuge areas respectively. All dimensions are in meters (m) except for E.
Figure 4: Circular flow chart displaying a potential sequence of steps to study the impacts of hydropeaking in flume conditions and to propose mitigation measures accordingly. Adapted from Costa et al. (2019).


Introduction

The solution consists of fish flow-refuges to be deployed in rivers affected by hydropeaking. The design of this solution was based on the analysis of fish responses (blood physiology and movement behaviour) in relation to changing flow events that mimicked hydropeaking conditions in rivers. Diverse flow-events changing in frequency, magnitude, duration and rate of change and flow-refuges were tested. Fish responses were quantified to effectively measure the utility of the structures as flow-refuges for fish. The mitigation measures here presented are lateral refuges, specifically lateral deflectors and overhead structures (Figure 1 and 2), which exhibited the highest use rates. The material, dimensions, number and position in the flume (Figure 3) were selected according to 1) material resistance and ability to mimic natural refuges, 2) species-specific traits, and 3) previous research conducted for other fish species.

Methods, tools, and devices

During planning

To design flow-refuges for fish as mitigation measures to hydropeaking, it is necessary to understand the effects of rapid flow fluctuations on fish and which variations in flow are causing those effects. A promising approach is to simulate the flow events occurring in hydropeaking rivers in artificial flumes. To examine the potential effects of hydropeaking and to propose flow-refuges as mitigation solutions, a series of steps that incorporate multiple disciplines (Figure 4) should be adopted. These steps are complementary and not mutually exclusive; for example, the selection of the target species dictates the selection of the flow-event and type of flow-refuge (Figure 4).

First, it is necessary to identify the flow changes (flow rate, duration, frequency, rate of change and timing) that occur in rivers affected by hydropeaking and adapt it to flume conditions. The peak discharges, frequency and ramping rates to be tested can be adapted during the experiments according to the findings of each trial.

The design of potential low-refuges has also to consider the characteristics of the flume. It is preferable that the flume has a bottom adequate to attach structures of different shapes, sizes and material. For the design of the presented flow-refuges the trials were conducted at an indoor flume (8.00 m x 0.70 m x 0.80 m), constructed on a steel frame with glass panels on both sides, with a usable area for fish that was limited by two perforated metal panels creating a 6.5 m long-reach. The lateral deflectors consisted of vertical PVC flashboards (0.30 m x 0.76 m x 0.015 m) attached to the flume bottom to mimic lateral refuges in a river channel (Figure 1). The reasoning to select lateral structures was: (i) their broad use in river restoration actions (Pretty et al., 2003), (ii) velocity preferences of the target species (Ferreira et al., 2007; Oliveira et al., 2002); (iii) velocity refuges proposed for other species (Ribi et al., 2014), (iv) habitat modelling studies based on suitability curves (Almeida et al., 2017), and in (v) studies aiming at designing effective fishways for Iberian cyprinids (Branco et al., 2013).

For the overhead cover, the structure was constructed in maritime plywood and was conceptualised based on bank hides that were designed for habitat improvement for trout, termed as LUNKERS (Little Underwater Neighbourhood Keepers Encompassing Rheotactic Salmonids) (IDNR, 2018). This structure (0.60 m x 0.08 m x 0.24 m) was installed in the right wall of the flume (Figure 2 and Figure 3).

The target fish species should be representative of the habitat where the flow-refuge will be deployed, or share the same habitat guilds. To measure the effectiveness of flow-refuges as solutions to mitigate hydropeaking based on fish responses, different organism-level responses should be selected (e.g., metabolic changes and whole-animal performance metrics likely to be associated with rapid flow fluctuations). Glucose and lactate could be adequate because they generally increase after endocrine processes directly associated with primary responses to stress (Pankhurst, 2011). Glucose generally increases after the cortisol response through the cortisol-mediated gluconeogenesis (Pankhurst, 2011); thus, there is a time latency between cortisol and the glucose response, and it has been broadly used in flow variability studies with reported increments comparatively to pre-stress levels (Arnekleiv et al., 2004; Krimmer et al., 2011). Lactate is a metabolite of muscle activity and is expected to increase during continued swimming effort (Kieffer, 2000), ultimately resulting in exhaustion (Wendelaar Bonga, 1997). The validity of a fish response will only be significant if compared with a base-flow or control condition.

To examine the effectiveness of the flow-refuge according to each flow event, the behaviour metrics should be selected based on fish motion directed towards the structure and on swimming activity in the flume. The behaviour metrics can be further divided into two categories: 1) flow-refuge use, and 2) swimming activity in the flume. The swimming activity metrics can be selected for their likelihood to be expressed by fish under the simulated peak events. For example, they can be separated into two types: fish drifts, defined as downstream fish displacements driven by passive advection of the body in the flow direction, and fish sprints, defined as a swimming activity lasting a few seconds and characterised by several tail beats. A detailed characterization of the flow field should be conducted to relate physiological responses, changes in motion, and flow-refuge use, with the hydraulic conditions created by their presence and flow fluctuations. It will be possible to predict the flow field for different flow-refuge configurations using a numerical model, after calibration using ADV measurements. Innovative flow-sensing technology, such as artificial lateral lines, provide a close representation of the hydrodynamic conditions that fish would experience in nature and thus, they should be considered together with classical flow sensing technologies.

During implementation

The flow-refuges should assure low-velocity regions during up-ramping and connectivity with the main channel during the down-ramping stage. To guarantee these conditions it is necessary to consider specific design criteria (e.g. size and position) (Table 1) according to the existing hydraulic conditions in the river.

Table 1 Design criteria for the deployment of flow-refuges in streams affected by hydropeaking.

Type of refuge Design criteria Rationale Reference
Lateral refuges Length, angle Opening angle:
-Same order of magnitude as the fish body length to favor group behavior, guide flow, prevent clogging and create or maintain the flow dynamics of the pool-riffle (sediment deposition-transport) systems while avoiding bank erosion.
-Excessively wide angles, in relation to the river bank, are discouraged
Santos et al., 2014;
Ribi et al., 2014;
Carré et al., 2007;
Pagliara et al., 2015
Water level The downstream area of the deflectors (refuge area) should avoid potential stranding zones, or assure a minimum water depth
of 0.5 m, especially during down-ramping.
Almeida et al., 2017;
Ribi et al., 2014
L-structures Water level Guarantee that these structures are permanently submerged to assure effective use and durability. USDA, 2007
Overhead cover Consider season and ontogeny: L. bocagei seeks out covered areas more in autumn in comparison to the warmest spring and
summer seasons, whereas microhabitat use depends on size class.
Boavida et al., 2015;
Santos et al., 2017

These design criteria can be generalised to streams affected by hydropeaking as long as they are adapted to the ecological requirements of the fish community and the hydraulic conditions of the affected stream.

During operation

Not applicable

Relevant MTDs and test cases

Relevant MTDs
3D fish tracking system
3D sensorless, ultrasound fish tracking
Acoustic Doppler velocimetry (ADV)
CASiMiR
COSH-tool
Current meter
Double Averaging method
FLOW-3D
Hydropeaking indicator
Hydropeaking tool
LiDAR
OpenFOAM
Particle image velocimetry (PIV)
Radio frequency identification with passive integrated transponder (PIT tagging)
River2D
Sediment simulation in intakes with Multiblock option (SSIIM)
Shelter measurements
Structure from motion (SfM)
TELEMAC
Visible implant elastomer
Relevant test cases Applied in test case?
Bannwil test case -
Freudenau test case Yes
Gotein test case -
Guma and Vadocondes test cases -
Ham test case Yes
Las Rives test case -
Trois Villes test case -

Classification table

Classification Selection
Fish species for the measure Eel and Lamprey
Does the measure require loss of power production -
-
Structural (requires no additional flow release)
Recurrence of maintenance Weekly
Which life-stage of fish is measure aimed at -
Juveniles
Adult fish
-
Which physical parameter is addressed -
-
-
-
-
-
-
-
Hydropower type the measure is suitable for -
-
Section in the regulated system measure is designed for -
-
-
-
River type implemented Steep gradient (up to 0.4 %)
Fairly steep with rocks, boulders (from 0.4 to 0.05 %)
Slow flowing, lowland, sandy (less than 0.05 %)
Level of certainty in effect Moderately certain
Technology readiness level TRL 4: technology validated in lab
Cost of solution See cost table

Relevant literature

From conducted experiments:

  • Costa, M., Boavida, I., Almeida, V., Cooke, S., Pinheiro, A., 2018. Do artificial velocity refuges mitigate the physiological and behavioural consequences of hydropeaking on a freshwater Iberian cyprinid? Ecohydrology 11. doi:10.1002/eco.1983
  • Costa, M., Ferreira, M., Pinheiro, A., Boavida, I., 2019a. The potential of lateral refuges for Iberian barbel under simulated hydropeaking conditions. Ecol. Eng. 127, 567–578. doi:10.1016/J.ECOLENG.2018.07.029
  • Moreira M., Costa, M.J., Valbuena-Castro, J., Pinheiro, A.N., Boavida,I. 2020. Cover or Velocity: What Triggers Iberian Barbel (Luciobarbus Bocagei) Refuge Selection under Experimental Hydropeaking Conditions? Water 12, 317. doi:10.3390/w12020317

Other literature:

  • Almeida, R., Boavida, I., Pinheiro, A.N., 2017. Habitat modeling to assess fish shelter design under hydropeaking conditions. Can. J. Civ. Eng. 44, 90–98. doi:10.1139/cjce-2016-0186
  • Arnekleiv, J. V., Urke, H.A., Kristensen, T., Halleraker, J.H., Flodmark, L.E.W., 2004. Recovery of wild, juvenile brown trout from stress of flow reduction, electrofishing, handling and transfer from river to an indoor simulated stream channel. J. Fish Biol. 64, 541–552. doi:10.1046/j.1095-8649.2003.00320.x
  • Boavida, I., Santos, J.M., Ferreira, M.T., Pinheiro, A.N., 2015. Barbel habitat alterations due to hydropeaking. J. Hydro-Environment Res. 9, 237–247. doi:10.1016/j.jher.2014.07.009
  • Branco, P., Santos, J.M., Katopodis, C., Pinheiro, A., Ferreira, M.T., 2013. Pool-Type Fishways: Two Different Morpho-Ecological Cyprinid Species Facing Plunging and Streaming Flows. PLoS One 8, 1–9. doi:10.1371/journal.pone.0065089
  • Costa, M., Pinheiro, A., Boavida, I., 2019. Habitat Enhancement Solutions for Iberian Cyprinids Affected by Hydropeaking: Insights from Flume Research. Sustainability 11, 6998. doi:10.3390/su11246998
  • Ferreira, M.T., Oliveira, J., Caiola, N., de Sostoa, A., Casals, F., Cortes, R., Economou, A., Zogaris, S., Garcia-Jalon, D., Ilhéu, M., Martinez-Capel, F., Pont, D., Rogers, C., Prenda, J., 2007. Ecological traits of fish assemblages from Mediterranean Europe and their responses to human disturbance. Fish. Manag. Ecol. 14, 473–481. doi:10.1111/j.1365-2400.2007.00584.x
  • IDNR, 2018. River Restoration Toolbox Practice Guide 6—Aquatic Habitat/Cover Features. Des Moines.
  • Kieffer, J.D., 2000. Limits to exhaustive exercise in fish. Comp. Biochem. Physiol. Part A Mol. Integr. Physiol. 126, 161–179. doi:10.1016/S1095-6433(00)00202-6
  • Krimmer, A.N., Paul, A.J., Hontela, A., Rasmussen, J.B., 2011. Behavioural and physiological responses of brook trout Salvelinus fontinalis to midwinter flow reduction in a small ice-free mountain stream. J. Fish Biol. 79, 707–725. doi:10.1111/j.1095-8649.2011.03053.x
  • Oliveira, J.M., Ferreira, A.P., Ferreira, M.T., 2002. Intrabasin variations in age and growth of Barbus bocagei populations. J. Appl. Ichthyol. 18, 134–139. doi:10.1046/j.1439-0426.2002.00333.x
  • Pankhurst, N.W., 2011. The endocrinology of stress in fish: an environmental perspective. Gen. Comp. Endocrinol. 170, 265–275. doi:10.1016/j.ygcen.2010.07.017
  • Pretty, J.L., Harrison, S.S.C., Shepherd, D.J., Smith, C., Hildrew, A.G., Hey, R.D., 2003. River rehabilitation and fish populations: Assessing the benefit of instream structures. J. Appl. Ecol. 40, 251–265. doi:10.1046/j.1365-2664.2003.00808.x
  • Ribi, J.-M., Boillat, J.-L., Peter, A., Schleiss, A.J., 2014. Attractiveness of a lateral shelter in a channel as a refuge for juvenile brown trout during hydropeaking. Aquat. Sci. 76, 527–541. doi:10.1007/s00027-014-0351-x
  • Santos, J.M., Branco, P., Katopodis, C., Ferreira, M.T., Pinheiro, A.N., 2014. Retrofitting pool-and-weir fishways to improve passage performance of benthic fishes: Effect of boulder density and fishway discharge. Ecol. Eng. 73, 335–344. doi:10.1016/j.ecoleng.2014.09.065
  • Santos, J.M., Rivaes, R., Boavida, I., Branco, P., 2017. Structural microhabitat use by endemic cyprinids in a Mediterranean-type river: Implications for restoration practices. Aquat. Conserv. Mar. Freshw. Ecosyst. doi:10.1002/aqc.2839
  • Wendelaar Bonga, S.E., 1997. The stress response in fish. Physiol. Rev. 77, 591–625. doi:physrev.1997.77.3.591