Difference between revisions of "Migration barrier removal"

From FIThydrowiki
Jump to navigation Jump to search
m (Text replacement - "category:Measures" to "category:Solutions")
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[file:icon_downstream.png|right|150px|link=[[Downstream fish migration]]]]
 +
 
=Introduction=
 
=Introduction=
 
Not only is a hydropower dam a barrier in itself, it also changes the upstream river reach into a more lake-like habitat. Increased fish mortality due to predation at downstream migration barriers and dammed reaches may in some cases result in greater mortality than turbine passages (Jepsen et al. 1998; Koed et al. 2002). If connectivity for is to be restored, it should initially be considered whether the migration barrier can be removed. It is often the best and most long-term solution if the goal is to recreate connectivity. Here, the solution focuses on power-regulated rivers where dams will basically be maintained but also in power-regulated rivers there are possibilities for removing obstacles. In particular, smaller weirs have been removed in residual flow reaches or minimum flow reaches with great success (Fjeldstad et al. 2012).  
 
Not only is a hydropower dam a barrier in itself, it also changes the upstream river reach into a more lake-like habitat. Increased fish mortality due to predation at downstream migration barriers and dammed reaches may in some cases result in greater mortality than turbine passages (Jepsen et al. 1998; Koed et al. 2002). If connectivity for is to be restored, it should initially be considered whether the migration barrier can be removed. It is often the best and most long-term solution if the goal is to recreate connectivity. Here, the solution focuses on power-regulated rivers where dams will basically be maintained but also in power-regulated rivers there are possibilities for removing obstacles. In particular, smaller weirs have been removed in residual flow reaches or minimum flow reaches with great success (Fjeldstad et al. 2012).  
Line 5: Line 7:
  
 
==During planning==
 
==During planning==
Planning of fish barrier removal will start with mapping and surveying of the barrier itself and the river reach upstream and downstream of the barrier. This includes measurements of water covered area, water edges and river slope and the bathymetry of the area. Geographic data should be handled in GIS software for further planning and analyses. The construction planning should be supported with simple hydraulic modelling or calculations, such as the models River2D, HEC-RAS 2D or OpenFoam (see Chapter 9.1 for references). The physical adjustments should then be planned according to the hydraulic calculations, assuring a stable bottom substrate and hydraulic conditions suitable for fish migrations  
+
Planning of fish barrier removal will start with mapping and surveying of the barrier itself and the river reach upstream and downstream of the barrier. This includes measurements of water covered area, water edges and river slope and the bathymetry of the area. Geographic data should be handled in GIS software for further planning and analyses. The construction planning should be supported with simple hydraulic modelling or calculations, such as the models [[River2D]], [[HEC-RAS]] 2D or [[OpenFOAM]]. The physical adjustments should then be planned according to the hydraulic calculations, assuring a stable bottom substrate and hydraulic conditions suitable for fish migrations
  
 
==During implementation==
 
==During implementation==
Physical implementation of migration barrier removals requires heavy machinery suited for the river size and its surrounding terrain, such as excavators and lorries. It must be considered how the different parts of the barrier, such as rocks and boulder, can be used as elements in the new habitat. Under normal conditions, none or only small volumes of substrate need to be transported to or from the construction site. Here, it is crucial that the labour involved has the relevant experience to make the best decisions while adjusting the physical habitat and that they have the required understanding of the planning documents and purpose of the measures
+
Physical implementation of migration barrier removals requires heavy machinery suited for the river size and its surrounding terrain, such as excavators and lorries. It must be considered how the different parts of the barrier, such as [[Placement of stones in the river|rocks]] and boulders, can be used as elements in the new habitat. Under normal conditions, none or only small volumes of substrate need to be transported to or from the construction site. Here, it is crucial that the labor involved has the relevant experience to make the best decisions while adjusting the physical habitat and that they have the required understanding of the planning documents and purpose of the measures
  
 
==During operation==
 
==During operation==
 
Physical habitat measures in regulated rivers must often be maintained to ensure that functions related to flow and sediments are restored, such as flood events and connectivity of the sediments. The frequency of the maintenance will be very site-specific.  
 
Physical habitat measures in regulated rivers must often be maintained to ensure that functions related to flow and sediments are restored, such as flood events and connectivity of the sediments. The frequency of the maintenance will be very site-specific.  
 +
 +
=Relevant MTDs and test cases=
 +
{{Suitable MTDs for Migration barrier removal}}
  
 
=Classification table=
 
=Classification table=
 
{{Migration barrier removal}}
 
{{Migration barrier removal}}
  
[[category:Downstream fish migration measures]][[category:Measures]]
+
=Relevant literature=
Migration barrier removal
+
*Fjeldstad, H-P, Barlaup, B.T., Stickler, M, Gabrielsen, S.-E. and Alfredsen, K. 2012. Removal of weirs and the influence on physical habitat for salmonids in a Norwegian river. River Research and Applications; 28, pp. 753-763.
{| class="wikitable"
+
*Jepsen, N., Aarestrup, K., Økland, F. and Rasmussen, G. 1998. Survival of radiotagged Atlantic salmon (''Salmo salar L.'') – and trout (''Salmo trutta L.'') smolts passing a reservoir during seaward migration. Hydrobiologia 371/372: 347-353.
! Classification !! Selection
+
*Koed A, Jepsen N, Aarestrup K, Nielsen C (2002) Initial mortality of radio-tagged Atlantic salmon (''Salmo salar L.'') smolts following release downstream of a hydropower station. Hydrobiologia 483: 31−37
|-
+
[[category:Downstream fish migration measures]][[category:Solutions]]
|Fish species for the measure||[[Fish species for the measure::All]]
 
|-
 
|rowspan = "3"|Does the measure require loss of power production||-
 
|-
 
||-
 
|-
 
||[[Does the measure require loss of power production::Structural (requires no additional flow release)]]
 
|-
 
||Recurrence of maintenance||[[Recurrence of maintenance::Never]]
 
|-
 
|rowspan = "4"|Which life-stage of fish is measure aimed at||-
 
|-
 
||-
 
|-
 
||-
 
|-
 
||[[Which life-stage of fish is measure aimed at::Movements and migration of fish]]
 
|-
 
|rowspan = "8"|Which physical parameter is addressed||[[Which physical parameter is addressed::Barriers]]
 
|-
 
||-
 
|-
 
||[[Which physical parameter is addressed::Flow variations]]
 
|-
 
||[[Which physical parameter is addressed::Substrate and hyporheic zone]]
 
|-
 
||[[Which physical parameter is addressed::Water temperature]]
 
|-
 
||[[Which physical parameter is addressed::Ice]]
 
|-
 
||[[Which physical parameter is addressed::Water velocity]]
 
|-
 
||[[Which physical parameter is addressed::Water depth]]
 
|-
 
|rowspan = "2"|Hydropower type the measure is suitable for||[[Hydropower type the measure is suitable for::Plant in dam]]
 
|-
 
||[[Hydropower type the measure is suitable for::Plant with bypass section]]
 
|-
 
||Dam height (m) the measure is suitable for||[[Dam height (m) the measure is suitable for::Up to 20]]
 
|-
 
|rowspan = "4"|Section in the regulated system measure is designed for||[[Section in the regulated system measure is designed for::In dam/power plant]]
 
|-
 
||-
 
|-
 
||-
 
|-
 
||-
 
|-
 
|rowspan = "3"|River type implemented||[[River type implemented::Steep gradient (up to 0.4 %)]]
 
|-
 
||[[River type implemented::Fairly steep with rocks, boulders (from 0.4 to 0.05 %)]]
 
|-
 
||[[River type implemented::Slow flowing, lowland, sandy (less than 0.05 %)]]
 
|-
 
||Level of certainty in effect||[[Level of certainty in effect::Moderately certain]]
 
|-
 
||Technology readiness level||[[Technology readiness level::TRL 9: actual system proven in operational environment]]
 
|}
 

Latest revision as of 10:03, 26 October 2020

Icon downstream.png

Introduction

Not only is a hydropower dam a barrier in itself, it also changes the upstream river reach into a more lake-like habitat. Increased fish mortality due to predation at downstream migration barriers and dammed reaches may in some cases result in greater mortality than turbine passages (Jepsen et al. 1998; Koed et al. 2002). If connectivity for is to be restored, it should initially be considered whether the migration barrier can be removed. It is often the best and most long-term solution if the goal is to recreate connectivity. Here, the solution focuses on power-regulated rivers where dams will basically be maintained but also in power-regulated rivers there are possibilities for removing obstacles. In particular, smaller weirs have been removed in residual flow reaches or minimum flow reaches with great success (Fjeldstad et al. 2012).

Methods, tools, and devices

During planning

Planning of fish barrier removal will start with mapping and surveying of the barrier itself and the river reach upstream and downstream of the barrier. This includes measurements of water covered area, water edges and river slope and the bathymetry of the area. Geographic data should be handled in GIS software for further planning and analyses. The construction planning should be supported with simple hydraulic modelling or calculations, such as the models River2D, HEC-RAS 2D or OpenFOAM. The physical adjustments should then be planned according to the hydraulic calculations, assuring a stable bottom substrate and hydraulic conditions suitable for fish migrations

During implementation

Physical implementation of migration barrier removals requires heavy machinery suited for the river size and its surrounding terrain, such as excavators and lorries. It must be considered how the different parts of the barrier, such as rocks and boulders, can be used as elements in the new habitat. Under normal conditions, none or only small volumes of substrate need to be transported to or from the construction site. Here, it is crucial that the labor involved has the relevant experience to make the best decisions while adjusting the physical habitat and that they have the required understanding of the planning documents and purpose of the measures

During operation

Physical habitat measures in regulated rivers must often be maintained to ensure that functions related to flow and sediments are restored, such as flood events and connectivity of the sediments. The frequency of the maintenance will be very site-specific.

Relevant MTDs and test cases

Relevant MTDs
Acoustic telemetry
BASEMENT
Bedload monitoring system
CASiMiR
FLOW-3D
HEC-RAS
OpenFOAM
Radio frequency identification with passive integrated transponder (PIT tagging)
Radio telemetry
River2D
Sediment simulation in intakes with Multiblock option (SSIIM)
Shaft hydropower plant
Structure from motion (SfM)
TELEMAC
Visible implant elastomer
Relevant test cases Applied in test case?
N/A -

Classification table

Classification Selection
Fish species for the measure All
Does the measure require loss of power production Operational (requires flow release outside turbine)
-
-
Recurrence of maintenance Irregular at events
Which life-stage of fish is measure aimed at -
-
-
Movements of migration of fish
Which physical parameter is addressed N/A
-
-
-
-
-
-
-
Hydropower type the measure is suitable for Plant in dam
Plant with bypass section
Dam height (m) the measure is suitable for Up to 20
Section in the regulated system measure is designed for In dam/power plant
-
-
-
River type implemented Steep gradient (up to 0.4 %)
Fairly steep with rocks, boulders (from 0.4 to 0.05 %)
Slow flowing, lowland, sandy (less than 0.05 %)
Level of certainty in effect Moderately certain
Technology readiness level TRL 9: actual system proven in operational environment
Cost of solution See cost table

Relevant literature

  • Fjeldstad, H-P, Barlaup, B.T., Stickler, M, Gabrielsen, S.-E. and Alfredsen, K. 2012. Removal of weirs and the influence on physical habitat for salmonids in a Norwegian river. River Research and Applications; 28, pp. 753-763.
  • Jepsen, N., Aarestrup, K., Økland, F. and Rasmussen, G. 1998. Survival of radiotagged Atlantic salmon (Salmo salar L.) – and trout (Salmo trutta L.) smolts passing a reservoir during seaward migration. Hydrobiologia 371/372: 347-353.
  • Koed A, Jepsen N, Aarestrup K, Nielsen C (2002) Initial mortality of radio-tagged Atlantic salmon (Salmo salar L.) smolts following release downstream of a hydropower station. Hydrobiologia 483: 31−37